Built-in closet – a design that is designed for installation in a corner, alcove, or other unused space. It can be equipped with a back wall, and maybe without it.
If the children’s room has a niche – that is, a recess in the wall, then it is necessary to take advantage of it, organizing a storage system there. Especially since the design of the niche cabinet is very simple and does not need side walls – in fact, it is a ready-made front facade. Therefore, the furniture will cost inexpensively.
If there is no niche in the room, the cabinet can be built into an unused corner. Corner cabinets can have different forms: be L-shaped, triangular, or trapezoidal. It has a high capacity and is easy to use.
For the children’s room, where live more than one child is, a large cabinet that takes up the entire wall is perfect. As a rule, it is built along the smaller length of the wall, so as not to make the room too narrow. Its height – to the ceiling allows you to separately store things for different-aged children: the baby just can not reach the department of a teenager.
The advantages of such a cabinet include:
- saving space – the use of built-in furniture allows you to free up the area of the room, which is so necessary for the child for games and creativity;
- Masking unnecessary elements – the closet can close the protruding corner, a column, or communications. This not only provides a better aesthetics of the room but also the safety of children who may show interest in the wires out of curiosity or be injured by a ledge with a sharp corner while playing;
- the possibility of optimizing unused space – the design, located in a corner or alcove, allows you to use the area that does not have a functional load.
Despite these advantages, a built-in closet in the children’s room has a significant disadvantage – being prepared to make a rearrangement will not be so easy, because the design is made to specific dimensions and is mounted, and not just put like a classic closet.
Interior filling of the built-in closet in the nursery
Buying a built-in closet in the children’s room, you need to decide on its functional purpose – this will depend on the filling of the design, that is, its internal arrangement.
If the closet is a closet, then it should have several compartments:
- Upper – for the child’s headwear;
- The middle one is the largest compartment for suits and outerwear. It has a special crossbar for hanging trim stones. Often it is made retractable – so it will be easier for the child to reach the contents;
- The bottom one – is for shoes and other accessories;
- The side one with shelves – for laundry.
Preparing the niche in the built-in closet, what is important before the start of the repair
Built in wardrobes in alcoves is a practical and stylish solution that is very popular, and for good reason. The furniture almost merges with the wall. Useful space in the room is used as rationally as possible. Installation of a large, roomy cabinet eliminates the need to clutter the room with chests of drawers, nightstands. What do you need to install built-in furniture? An alcove. How to prepare it correctly?
The niche in the wall: where does it come from?
Niches in modern apartments – it is an architectural element of the building or a specially made hole. Its presence provides additional space that can be used for different purposes. Independently, you can make a small niche for electric curtain rails or other interior elements. Built-in furniture is placed only in those niches, which were originally provided by the project. The fact is that they must be spacious enough. If you start to make an opening in the wall, it will have a negative impact on the operational properties of the supporting structures.
Preparing the niche to start the repair
Be sure to prepare the niche for the closet compartment before the start of the main repair work. In order for the furniture to fit perfectly in the intended place for it, pay close attention to the following aspects:
- wall irregularities – fix them;
- unevenness of the ceiling and floor – correct;
- corners must be perfectly flat (90 degrees);
- the optimal depth of the niche – is 60 cm, so you can hang things on the shoulders.
If you do not prepare the niche properly, all the effort and money spent on the purchase and installation of closets will be in vain. Problems will arise in a few weeks after the installation of furniture. An uneven floor or ceiling will cause the door to warp. Weak walls of plasterboard panels may not be able to withstand the weight of the construction.
Why is it so important to prepare the niche for finishing? The fact is that during the preparation you may need to do “dirty” work: adjusting the corners, leveling the surfaces, etc. After completing all the measures, don’t forget to check that the parameters of the niche meet the established requirements.
Choosing built-in furniture
Once the niche is prepared, you can proceed to measurements and calculations. The body is most often not used. The sides and rear surfaces of the niche perform the function of the walls. The furniture is designed all the way to the ceiling. It is very important to choose a quality sliding system so that the built-in wardrobe compartment properly performed its functions for a long period. As for the design, it all depends on your personal preferences:
- blank fronts;
- mirrors;
- photo-printed glass;
- sandblasting.
What are the features?
In practice, the built-in niche cabinet is a popular and convenient solution. If there is a recess in the wall, do not rush during the repair to close it with plasterboard.
There is a much more correct way out of the situation. This is a section for storing things, clothes, household items, etc. From the niche, you can make a household cupboard or a full-fledged closet.
The main feature, which has a built-in closet in the niche, is the ability to use this zone without much harm to the rest of the area of the room.
Drawing a niche with a storage system can be tailored to any taste, need, and situation. The niche is also considered a bevel under the roof of the upper floor, where they often make a mansard closet.
The niche can be a real salvation in a narrow hallway or in apartments with a small balcony, or no balcony at all. Their recesses are used to make storage rooms and other. Built-in closets – built-in closets to order, custom cabinets – https://urbanwardrobes.co.uk/services/sliding-wardrobes
Design options
The considered built-in niche cabinet is different from the usual modular furniture. Dimensions are non-standard, and therefore for the project you need accurate measurements.
An important requirement – it is flat walls and the ceiling in the recess. The absence of distortions will allow you to reliably and correctly place the components of the internal filling. If there are deviations, it is better to fix them with putty, or to trim with plasterboard.
Structurally, a built-in niche cabinet comes in 2 types.
Frame. It has side walls, bottom, and back panel. A full-fledged cabinet. If needed, if it can be moved or relocated? This is a one-piece unit that has internal filling. To make it for a niche, you’ll have to buy custom, given the individual and exact dimensions. The walls are necessarily aligned so that there are no gaps. The big disadvantage is that the walls and bottom take away a lot of space. It is better used for storing more clothes and items;
With a false frame. These are cabinets that are mounted in flat niches. Have only the outer front part. There are no back walls. The role of the ceiling part, as well as the side walls, performs the surface of the recess itself. Minus an the impossibility to move and transport the construction. But every millimeter is used to the maximum.
Here the choice is obvious, in my opinion. But I could be wrong. So I’m waiting for your comments.
Opening systems
As an option, a closet built into the wall can not close anything at all. Or to come up with some kind of curtain.
But in practice, in order not to create the effect of clutter and chaos, it is better to close the fronts.
There are several options for this.
Swinging doors. The option with hinged doors is a classic, as well as a budget solution. Hinges or hinges are used. But you can not put anything next to the cabinet. Otherwise, the doors will not open fully;
Sliding systems. Here we distinguish between monorails and support systems for coupe doors. In the first case, the design moves with a roller on the lower slot. The upper rails keep the system vertical. The support system has an upper mount and bottom locks. For the assembly to work reliably and for a long time, you need high-quality fittings. Do not skimp. This is the most practical choice;
Folding doors. Something like an accordion. Consists of several elements. They connect to each other. When folded, they come together, taking up a minimum of space. Silent and light. But they suffer from gaps. Plus, the individual blade can break or malfunction. You’ll have to replace it.
As for me, the best choice to close the closet built into the niche would be a sliding system. But if the openings are narrow, it is better to take alternative designs.
Thank you!